TheGrabitStore.com

I was a machinist for the first part of my working life after 4 years of Machinery Repairman in the Navy. I recognize a left-hand drill bit when I see it. For some reason unknown, even after reading the instructions that came with the Grabit set, I drilled using standard direction with my drill. Needless to say, it didn't drill well. It wouldn't even drill deep enough for the removal portion to grab and remove the #8 screw, even though I was using that end properly. I responded to the "No-Reply" email and, surprise, a reply came up for Anthony at Grabit. I explained that something didn't work and also suggested that this HAD TO BE operator error. The response said that he gets this regularly. Even though the directions say both drill and extract must be done in "reverse" direction. I slapped my forehead and looked at the Grabit package. Duh! Conspicuously written in bold arrow, "REVERSE." When used correctly, these things are a marvel. He even offered to replace the two that I damaged using incorrectly. Grabit gets 5, the operator gets 1. Anthony recommended 30-70 rpm as well. That was another surprise, but it works! My two-speed drill press only goes as slow as 160. Use your variable-speed cordless.

I bought these to remove some torx head bolts that stripped out. They are recessed. I followed the instructions for the extractor. I drilled it into the torx part of the bolt. Honestly? I had doubts. I thought the extractor would break. But? It didn't. Actually? It gripped so well? It broke the bolt head off. I was able to remove the plastic cover? Grab what was left? And? Took it out. Even though it didn't remove the bolt? It helped me grab what was left. Steel into Aluminum = rust. But? I'm very impressed. Everything's going well so far.

Microbits arrived in about a week. Turned out the set was too small for what I needed, but I tried them all anyway. No breaks. Ended up drilling out the broken screw. I will order a larger set soon. I based this purchase on a YouTube comparison video.

Them tools is just what my teenager needed in his toolbox. Good for takin' out them stripped screws from 3D printer bits and other gadgets. Helped us save some time and cash by not messin' up other stuff.

Tuk Progect Farm’s advic after the ones I alredy owned werent doing the job. Orderd the pro set and had it out immidietly with minumal effort. Would recomend to any one.

These would only be improved if they were unbreakable! However, I understand that's not possible, so they receive a solid 5-star rating for what they are!

The product failed right out of the gate. No better than a cheaper Chinese alternative. Broken right aftrr first use...